R412009379

描述

Version
Poppet valve

Housing
Polyamide

Sealing material
Acrylonitrile butadiene rubber

Protection class
IP65

Qn 1?2
8750 l/min

Qn 2?3
3700 l/min

Nominal flow Qn
8750 l/min

Compressed air connection input
G 1

Compressed air connection output
G 1

Version
Poppet valve, Can be assembled into blocks

Pilot
Internal

Sealing principle
Soft sealing

Working pressure min./max.
0—16 bar

Control pressure min./max.
2,5—16 bar

Ambient temperature min./max.
-10—50 Degree Celsius

Medium temperature min./max.
-10—50 Degree Celsius

Medium
Compressed air Neutral gases

Max. particle size
25 um

Duty cycle
100 %

Protection class according to EN 60529:2000, without electrical connector
IP65

Weight
0,924 kg

The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The filling valve builds up pressure slowly in the pneumatic systems, i.e. prevents a sudden pressure build-up during a recommissioning after a mains pressure failure or avoids emergency OFF switching. This allows dangerous abrupt cylinder motions to be avoided.
Actuating the electric priority circuit disrupts the slow pressure build-up and pressure p1 is immediately applied.
A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180?? about the vertical axis. Please see the operating instructions for further details.

Material

Housing
Polyamide

Front plate
Acrylonitrile butadiene styrene

Seals
Acrylonitrile butadiene rubber

Threaded bushing
Die cast zinc