R480680402

描述

Piston rod modification
through

Functional principle
double-acting

Cushioning
pneumatically

adjustable

Magnetic piston
with magnetic piston

Piston diameter
25 mm

Piston rod thread
M10x1,25

Standardization
ISO 6432

Stroke
10 mm

Sealing material
Acrylonitrile butadiene rubber,Polyurethane

Scraper
Polyurethane

ATEX optional

Compressed air connection
G 1/8

Compressed air connection type
Internal thread

Standards
ISO 6432

Certificates
ATEX optional

Compressed air connection
Internal thread

Working pressure min./max.
1—10 bar

Ambient temperature min./max.
-25—80 Degree Celsius

Medium temperature min./max.
-25—80 Degree Celsius

Medium
Compressed air

Max. particle size
50 um

Oil content of compressed air
0—5 mg/m3

Pressure for determining piston forces
6.3 bar

Weight
See table

The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre).

Clamping piece for magnetic field sensor necessary

ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135 Degree Celsius Db_X can be generated in the Internet configurator.
The operating temperature range for ATEX-certified cylinders is -20 Degree Celsius—50 Degree Celsius.
Warning: The front and rear piston rods must not be twisted against one another!

Material

Cylinder tube
Stainless steel

Piston rod
Stainless steel

Piston
Brass, Aluminum

Front cover
Aluminum, anodized

End cover
Aluminum, anodized

Seal
Acrylonitrile butadiene rubber Polyurethane

Nut for cylinder mounting
Steel, galvanized

Nut for piston rod
Steel, galvanized

Scraper
Polyurethane