R422103585

描述

Switching principle
2*3/2

Version
Spool valve, positive overlapping

Housing
Polyoxymethylene

Sealing material
Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber,Polyurethane

Connector standard
DIN EN 60947-5-2

Protection class
IP65

Number of wires
3-pin

Port size
M8

Type
Plug

Nominal flow Qn
180 l/min

Compressed air connection input
mm4

Compressed air connection output
mm4

DC operating voltage
24 V

Activation
Electrically

Version
Spool valve, positive overlapping

Activation
Electrically

Pilot
Internal

Sealing principle
Soft sealing

Working pressure min./max.
3—7 bar

Ambient temperature min./max.
-10—50 Degree Celsius

Medium temperature min./max.
-10—50 Degree Celsius

Medium
Compressed air

Max. particle size
5 um

Oil content of compressed air
0—5 mg/m3

Nominal flow Qn
See table

Connector standard
DIN EN 60947-5-2

Protection class acc. to DIN EN 61140 Electrically
Class III

Protection class with connection
IP65

Protective circuit
Z-diode

LED status display
Yellow

Duty cycle
100 %

Typ. switch-on time
12 ms

Typ. switch-off time
15 ms

Generic emission standard in accordance with
EN 61000-6-4:2002

Generic immunity standard in accordance with
IEC 61000-6-2:2005

mounting screws
M3

Mounting screw tightening torque
0,5 Nm

Weight
0,064 kg

The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre).
A duty cycle of 100 percent is only valid for single valves.

Material

Housing
Polyoxymethylene

Seals
Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber Polyurethane