R422001608

描述

Piston rod modification
through

Functional principle
Single-acting, retracted without pressure

Cushioning
elastic

Magnetic piston
with magnetic piston

Piston diameter
63 mm

Piston rod thread
M10

Standardization
ISO 21287

Stroke
10 mm

Sealing material
Polyurethane

Scraper
Polyurethane

Compressed air connection
G 1/8

Compressed air connection type
Internal thread

Standards
ISO 21287

Compressed air connection
Internal thread

Working pressure min./max.
1,5—10 bar

Ambient temperature min./max.
-20—80 Degree Celsius

Medium temperature min./max.
-20—80 Degree Celsius

Medium
Compressed air

Max. particle size
50 um

Oil content of compressed air
0—5 mg/m3

Pressure for determining piston forces
6.3 bar

The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre).

With cylinders with a piston rod extension, dimensions ??WH?? and ??ZB?? are increased by the value of the piston rod extension.
Piston mm50/63, stroke < 5 mm: AF= 11 mm Piston mm80/100, stroke < 5 mm: AF= 15 mm Material Cylinder tube Aluminum, anodized Piston rod Stainless steel Front cover Aluminum End cover Aluminum Seal Polyurethane Scraper Polyurethane