R414009643

描述

Housing
Die-cast aluminum,Steel

Sealing material
Hydrogenated acrylonitrile butadiene rubber

CE declaration of conformity

Protection class
IP65

Number of wires
5-pin

Port size
M12

Type
Plug

Nominal flow Qn
1300 l/min

Hysteresis
< 0.003 bar DC operating voltage 24 V Version Poppet valve Mounting orientation ? = 0---90?? ??? = 0---90?? Certificates CE declaration of conformity Working pressure max See table Ambient temperature min./max. 5---50 Degree Celsius Medium temperature min./max. 5---50 Degree Celsius Medium Compressed air Max. particle size 50 um Oil content of compressed air 1 mg/m3 Nominal flow Qn 1300 l/min Control Analog DC operating voltage 24 V Voltage tolerance DC -20% / +30% Permissible ripple 5% Max. power consumption 1400 mA Protection class IP65 Weight 2,05 kg Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and ?p = 0.2 bar The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre). With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request Material Housing Die-cast aluminum Steel Seals Hydrogenated acrylonitrile butadiene rubber