R412017958

描述

Switching principle
2*3/2

Version
Spool valve, positive overlapping

Housing
Polyamide fiber-glass reinforced

Sealing material
Hydrogenated acrylonitrile butadiene rubber

UR (Underwriters Laboratories)

Protection class
IP65,IP67,IP69K

Nominal flow Qn
700 l/min

Compressed air connection input
G 1/8

Compressed air connection output
G 1/8

DC operating voltage
24 V

Activation
Electrically

Version
Spool valve, positive overlapping

Activation
Electrically

Pilot
External

Sealing principle
Soft sealing

Blocking principle
Single base plate principle

Certificates
UR (Underwriters Laboratories)

Working pressure min./max.
-0,9—10 bar

Control pressure min./max.
2,5—10 bar

Ambient temperature min./max.
0—50 Degree Celsius

Medium temperature min./max.
0—50 Degree Celsius

Medium
Compressed air

Max. particle size
5 um

Oil content of compressed air
0—5 mg/m3

Nominal flow Qn
700 l/min

Pilot control exhaust
With collective pilot air exhaust

Protection class with connection
IP65 IP67 IP69K

Protective circuit
Z-diode

Reverse polarity protection
Protected against polarity reversal

LED status display
Yellow

Duty cycle
100 %

Typ. switch-on time
16 ms

Typ. switch-off time
25 ms

mounting screws
M5

Mounting screw tightening torque
2 Nm

Tightening torque tolerance
??0,2 mT

Weight
0,165 kg

The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre).

For series QR2 fittings, see ??Pneumatic connection technologies??.
The inner valve can be replaced by all series CL03 valves described under ??Valve systems??.
The pilot valve is UL (Underwriters Laboratories) certified.

Material

Housing
Polyamide fiber-glass reinforced

Seals
Hydrogenated acrylonitrile butadiene rubber

Threaded bushing
Brass, nickel-plated Stainless steel