R412006384

描述

Version
Poppet valve

Housing
Polyamide

Sealing material
Acrylonitrile butadiene rubber

Protection class
IP65

Port size
M12x1

Type
Plug

Qn 1?2
2000 l/min

Qn 2?3
380 l/min

Nominal flow Qn
2000 l/min

Compressed air connection input
G 1/4

Compressed air connection output
G 1/4

DC operating voltage
24 V

Version
Poppet valve, Can be assembled into blocks

Parts
Filling valve, 3/2-directional valve, electrically operated

Nominal flow
2000 l/min

Nominal flow 1 ? 2
2000 l/min

Nominal flow 2 ? 3
380 l/min

Working pressure min./max.
2,5—10 bar

Medium
Compressed air Neutral gases

Medium temperature min./max.
-10—50 Degree Celsius

Ambient temperature min./max.
-10—50 Degree Celsius

Pilot
Internal

Sealing principle
Soft sealing

Max. particle size
25 um

Protection class acc. to DIN EN 61140 with plug
IP65

Duty cycle
100 %

Weight
0,424 kg

The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180?? about the vertical axis. Please see the operating instructions for further details.
For unthrottled operation, the filling valve must be permanently electrically actuated.
Actuating the electric priority circuit disrupts the slow pressure build-up and pressure p1 is immediately applied.
The filling valve builds up pressure slowly in the pneumatic systems, i.e. prevents a sudden pressure build-up during a recommissioning after a mains pressure failure or avoids emergency OFF switching. This allows dangerous abrupt cylinder motions to be avoided.

Material

Housing
Polyamide

Front plate
Acrylonitrile butadiene styrene

Seals
Acrylonitrile butadiene rubber

Threaded bushing
Die cast zinc