5772020220

描述

Actuating control
single solenoid

Return type
With spring return

Switching principle
3/2

Version
Spool valve, positive overlapping

Housing
Die cast zinc,Polyamide fiber-glass reinforced

Sealing material
Acrylonitrile butadiene rubber

Connector standard
EN 175301-803:2006

Protection class
IP65

Number of wires
3-pin

Port size
EN 175301-803, form A

Type
Plug

Qn 1?2
1400 l/min

Qn 2?3
1400 l/min

Nominal flow Qn
1400 l/min

Compressed air connection input
M14x1,5

Compressed air connection output
M14x1,5

DC operating voltage
24 V

Activation
Electrically

Temperature resistance
-25 Degree Celsius cold-resistant

Version
Spool valve, positive overlapping

Activation
Electrically

Sealing principle
Soft sealing

Working pressure min./max.
See table

Control pressure min./max.
3—10 bar

Ambient temperature min./max.
-25—50 Degree Celsius

Medium temperature min./max.
-25—50 Degree Celsius

Medium
Compressed air

Max. particle size
50 um

Oil content of compressed air
0—1 mg/m3

Nominal flow Qn
1400 l/min

Nominal flow 1 ? 2
1400 l/min

Nominal flow 2 ? 3
1400 l/min

Pilot control exhaust
with directional pilot air exhaust

Connector standard
EN 175301-803:2006

Reverse polarity protection
Protected against polarity reversal

Compatibility index
13 14

Duty cycle
100 %

Weight
See table

The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre).

ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page.
option valve: The input and output compressed air connections can be exchanged.The valve can thereby be used in the NC or NO operating mode.

Material

Housing
Die cast zinc Polyamide fiber-glass reinforced

Seals
Acrylonitrile butadiene rubber