0822395605

描述

Piston rod modification
non-rotating, with front plate,Optionally through

Functional principle
double-acting

Cushioning
elastic

Magnetic piston
with magnetic piston

Piston diameter
50 mm

Standardization
NFE 49004

Stroke
30 mm

Sealing material
Polyurethane

Scraper
Polyurethane

Compressed air connection
G 1/8

Compressed air connection type
Internal thread

Temperature resistance
Optionally heat-resistant

Standards
NFE 49004

Compressed air connection
Internal thread

Ambient temperature min./max.
-20—80 Degree Celsius

Medium temperature min./max.
-20—80 Degree Celsius

Medium
Compressed air

Max. particle size
50 um

Oil content of compressed air
0—5 mg/m3

Pressure for determining piston forces
6.3 bar

The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre).

The material for heat-resistant scraper and seal variants (ambient temperature: -10 Degree Celsius—120 Degree Celsius) is fluorocaoutchouc.
Further options can be generated in the Internet configurator.

Material

Cylinder tube
Aluminum, anodized

Piston rod
Stainless steel

Front cover
Aluminum

End cover
Aluminum

Seal
Nitrile butadiene rubber Polyurethane

Front plate
Aluminum

Scraper
Polyurethane