5794675220

描述

Version
Poppet valve

Housing
Polyamide

Sealing material
Acrylonitrile butadiene rubber,Polyurethane

Protection class
IP65

Port size
ISO 15217, form C

Type
Plug

Nominal flow Qn
850 l/min

Compressed air connection input
mm8*1

Compressed air connection output
mm8*1

Operational voltage AC at 50 Hz
24 V

Operational voltage AC at 60 Hz
24 V

Activation
Electrically

Version
Poppet valve

Activation
Electrically

Pilot
External

Sealing principle
Soft sealing

Working pressure min./max.
0,5—8 bar

Control pressure min./max.
2—8 bar

Ambient temperature min./max.
-15—50 Degree Celsius

Medium temperature min./max.
-15—50 Degree Celsius

Medium
Compressed air

Max. particle size
5 um

Oil content of compressed air
0—1 mg/m3

Nominal flow Qn
See table

Protection class with connection
IP65

Reverse polarity protection
Protected against polarity reversal

Duty cycle
100 %

Typ. switch-on time
18 ms

Typ. switch-off time
16 ms

Weight
0,093 kg

The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre).

At an ambient temperature of 40 Degree Celsius the max. working pressure is 10 bar .
Versions with voltage of less than 50 V DC do not have a protective ground.
The control pressure must be at least as high as the working pressure.

Material

Housing
Polyamide

Seals
Acrylonitrile butadiene rubber Polyurethane