0821300954

描述

Version
Poppet valve

Housing
Die cast zinc

Sealing material
Acrylonitrile butadiene rubber

suitable for ATEX

Qn 1?2
2500 l/min

Qn 2?3
1600 l/min

Compressed air connection input
G 1/2

Compressed air connection output
G 1/2

Version
Poppet valve, Can be assembled into blocks

Pilot
Internal

Sealing principle
Soft sealing

Certificates
suitable for ATEX

Working pressure min./max.
0—16 bar

Control pressure min./max.
2,5—16 bar

Ambient temperature min./max.
-10—60 Degree Celsius

Medium temperature min./max.
-10—60 Degree Celsius

Medium
Compressed air Neutral gases

Max. particle size
5 um

Weight
1,69 kg

The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The filling valve builds up pressure slowly in the pneumatic systems, i.e. prevents a sudden pressure build-up during a recommissioning after a mains pressure failure or avoids emergency OFF switching. This allows dangerous abrupt cylinder motions to be avoided.
Do not position filling valves or filling units upstream of open consumers, such as nozzles, air barriers, air curtains, since these may prevent through connection of components.
Suitable for use in Ex zones 1, 2, 21, 22.
A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180?? about the vertical axis. Please see the operating instructions for further details.

Material

Housing
Die cast zinc

Front plate
Acrylonitrile butadiene styrene

Seals
Acrylonitrile butadiene rubber

Threaded bushing
Die cast zinc