R412008550

描述

Number of valve positions
2

Sealing material
Acrylonitrile butadiene rubber

Subbase
Polyamide

Number of wires
25-pin

Port size
D-Sub

Type
Plug

Compressed air connection input
3/8?

Compressed air connection output
M7

DC operating voltage
24 V

Type
Base plate for a single or double solenoid valve

Version
Multipole

Working pressure min./max.
See table

Ambient temperature min./max.
-5—50 Degree Celsius

Medium temperature min./max.
0—50 Degree Celsius

Medium
Compressed air

electr. connection
D-Sub plug, 25-pin, on the side, Link structure CMS

Number of valve positions max.
2

Grid dimension
11,8 mm

Rail mounting DIN EN 60715
TH35 * 15

Exhaust (3,5)
With directional exhaust (3/5)

Exhaust type
Ports separated

Mounting screw
cross recessed DIN EN ISO 4757-Z0

Tightening torque for mounting screws
0,2 Nm

The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre).

Double base plate principle

Material

Base plate
Polyamide

push-in fitting
Brass, nickel-plated

Seal
Acrylonitrile butadiene rubber

Screws
Steel

Tie-rods
Aluminum