2612081300

描述

Version
Spool valve

Sealing principle
Soft sealing

Blocking principle
Single base plate principle

Connection type
Plate connection

Standards
ISO 5599-2, ISO 2

Connector standard
ISO 5599-2

Working pressure min./max.
0—10 bar

Control pressure min./max.
2,7—10 bar

Ambient temperature min./max.
-20—50 Degree Celsius

Medium temperature min./max.
0—50 Degree Celsius

Medium
Compressed air

Max. particle size
50 um

Oil content of compressed air
0—5 mg/m3

Nominal flow Qn
2100 l/min

Compressed air connection
according to ISO 5599

Protection class with connection
IP65

Protection class according to NEMA
NEMA 4

Protective circuit
Z-diode

Reverse polarity protection
Protected against polarity reversal

LED status display
Green

Nominal resistance
288 ?

Duty cycle
100 %

Typ. switch-on time
28 ms

Typ. switch-off time
65 ms

Mounting screw
with hexagon socket

Mounting screw tightening torque
4 Nm

Weight
0,59 kg

Version
Spool valve

Sealing principle
Soft sealing

Blocking principle
Single base plate principle

Connection type
Plate connection

Standards
ISO 5599-2, ISO 2

Connector standard
ISO 5599-2

Working pressure min./max.
0—10 bar

Control pressure min./max.
2,7—10 bar

Ambient temperature min./max.
-20—50 Degree Celsius

Medium temperature min./max.
0—50 Degree Celsius

Medium
Compressed air

Max. particle size
50 um

Oil content of compressed air
0—5 mg/m3

Nominal flow Qn
2100 l/min

Compressed air connection
according to ISO 5599

Protection class with connection
IP65

Protection class according to NEMA
NEMA 4

Protective circuit
Z-diode

Reverse polarity protection
Protected against polarity reversal

LED status display
Green

Nominal resistance
288 ?

Duty cycle
100 %

Typ. switch-on time
28 ms

Typ. switch-off time
65 ms

Mounting screw
with hexagon socket

Mounting screw tightening torque
4 Nm

Weight
0,59 kg

The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre).

Housing
Aluminum Polyamide fiber-glass reinforced

Seals
Acrylonitrile butadiene rubber