R424B11120

描述

Standardization
ISO 5599-1

Frame size
ISO 3

Switching principle
5/2

Version
Poppet valve

Housing
Aluminum

Sealing material
Acrylonitrile butadiene rubber

Protection class
IP65

Port size
EN 175301-803, form A

Type
Plug

Nominal flow Qn
4300 l/min

DC operating voltage
24 V

Activation
Electrically

Version
Poppet valve

Activation
Electrically

Pilot
Internal

Sealing principle
Soft sealing

Blocking principle
Single base plate principle

Standards
ISO 5599-1, ISO 3

Working pressure min./max.
3,5—9 bar

Control pressure min./max.
3,5—9 bar

Ambient temperature min./max.
10—120 Degree Celsius

Medium temperature min./max.
10—120 Degree Celsius

Medium
Compressed air

Max. particle size
50 um

Oil content of compressed air
0—5 mg/m3

Nominal flow Qn
4300 l/min

Protection class with connection
IP65

Duty cycle
100 %

Typ. switch-on time
50 ms

Typ. switch-off time
80 ms

Mounting screw tightening torque
11 Nm

Weight
1,73 kg

The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre).

Max. ambient temperature: +180 Degree Celsius at 1 hour continuous operation and up to +200 Degree Celsius at 15 hours standby operation
At an ambient temperature of over 120 Degree Celsius , the duty cycle is reduced by 50%.
Scope of delivery: incl. valve plug connector and pilot valve

Material

Housing
Aluminum

Seals
Acrylonitrile butadiene rubber