R424B10514

描述

Switching principle
2*3/2

Version
Spool valve, positive overlapping

Housing
Polyamide

Sealing material
Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber

UR (Underwriters Laboratories)

Protection class
IP65

Nominal flow Qn
1400 l/min

DC operating voltage
24 V

For series
HF02-LG,CL03

Activation
Electrically

Version
Spool valve, positive overlapping

Activation
Electrically

Pilot
External, Internal

Sealing principle
Soft sealing

Blocking principle
Single base plate principle

Certificates
UR (Underwriters Laboratories)

Working pressure min./max.
-0,9—10 bar

Control pressure min./max.
10 bar

Ambient temperature min./max.
0—50 Degree Celsius

Medium temperature min./max.
0—50 Degree Celsius

Medium
Compressed air

Max. particle size
5 um

Oil content of compressed air
0—5 mg/m3

Nominal flow Qn
1400 l/min

Pilot control exhaust
With collective pilot air exhaust

Protection class with connection
IP65

Protective circuit
Z-diode

Reverse polarity protection
Protected against polarity reversal

LED status display
Yellow

Duty cycle
100 %

Typ. switch-on time
20 ms

Typ. switch-off time
33 ms

mounting screws
cross recessed DIN EN ISO 4757-Z2

Mounting screw tightening torque
1,3 Nm

Weight
0,144 kg

The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre).

The pilot type (external/internal) is not implemented in the valve, but in the end plate of the valve system.
The UL certification refers to the pilot valve.

Material

Housing
Polyamide

Seals
Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber