R422102434

描述

Actuating control
double solenoid

Return type
With spring return

Switching principle
2*3/2

Version
Spool valve, positive overlapping

Housing
Polyamide fiber-glass reinforced

Sealing material
Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber

Protection class
IP65

Nominal flow Qn
250 l/min

DC operating voltage
24 V

Activation
Electrically

Version
Spool valve, positive overlapping

Activation
Electrically

Pilot
External

Sealing principle
Soft sealing

Blocking principle
Base plate principle, multiple

Working pressure min./max.
-0,9—10 bar

Control pressure min./max.
3—8 bar

Ambient temperature min./max.
-10—60 Degree Celsius

Medium temperature min./max.
-10—60 Degree Celsius

Medium
Compressed air

Max. particle size
40 um

Oil content of compressed air
0—5 mg/m3

Nominal flow Qn
See table

Pilot control exhaust
with directional pilot air exhaust

Protection class with connection
IP65

Protective circuit
Z-diode

Reverse polarity protection
Protected against polarity reversal

LED status display
Yellow

Duty cycle
100 %

Typ. switch-on time
16 ms

Typ. switch-off time
20 ms

mounting screws
Hexalobular socket (TORX) ISO 10664-8

Mounting screw tightening torque
0,5 Nm

Weight
See table

The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
The pressure dew point must be at least 15 Degree Celsius under ambient and medium temperature and may not exceed 3 Degree Celsius .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the ??Technical information?? document (available in the MediaCentre).

Material

Housing
Polyamide fiber-glass reinforced

Seals
Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber

Front plate
Polyamide fiber-glass reinforced

End plate
Polyamide